news- Zhejiang Qinwei Fluid Technology Co., Ltd

Lang

home / news

Various types of flared pipe joints
2020-07-29
The flared pipe joint is pushed by the tightening of the jacket nut, and the compression ring presses the inner wall of the nozzle to tightly adhere to the outer cone of the joint body to play a sealing role. After loose...
Working principle and application of hydraulic hose joint
2020-07-22
The stainless steel pipe joint is a connecting tool between the pipeline and the pipeline, and the connecting point between the component and the pipeline that can be disassembled and assembled. It acts as an indispensab...
Introduction of the best garden hose accessories
2020-07-17
We will study different types of materials and the advantages and disadvantages of each material. Each accessory has a different purpose, but the general idea is to help you save water or extend the length of the garden ...
The difference between flaring, ferrule and welding pipe joint
2020-07-08
Flared type pipe joint: Flared type pipe joint Applicable medium: Oil, water, gas and other non-corrosive or corrosive medium pipe joints. The specifications of the steel pipe used are relatively flexible. After welding ...
What is the difference between the hydraulic pipe joint and the joint body and elbow
2020-06-30
1. The joint body is a bridge connecting the hydraulic pipe joint and the equipment. The elbow is a pipe fitting that changes the direction of the pipeline, and their division of labor is different. 2. In the hydraulic...
Stainless steel pipe joint installation points and precautions for stainless steel joints
2020-06-17
Stainless steel pipe joint installation points and precautions for stainless steel joints 1. The stainless steel joint rotary joint is precision-manufactured, and impact should be avoided during handling and storage to a...
Precautions for assembly of brass pipe fittings
2020-06-10
Precautions for assembly of pipe joints: (1) The perpendicularity of the end surface of the steel pipe to the axis is less than 0.50. (2) Deburring the end face, chamfering 0.2×450. (3) Apply proper amount of grease to t...
Reliability analysis of push-in ferrule-type pipe joint seal
2020-06-03
Cause of leakage1. The steel pipe is not inserted in the end2. The nut is not tightened3. The outer surface of the steel pipe is scratched or the steel pipe is not round.4. The steel pipe is too hard Reliability analys...
Are the compression fittings on the brake line legal
2020-05-28
Brake line maintenance: when to use compression joints As many vehicles begin to age, brake line repair is an essential maintenance step. Brake lines are easy to become brittle, rust and leak, which reduces the reliabi...
How reliable is the compression fitting
2020-05-20
Reliability of plumbing fittings-thread and compression No matter where there is liquid, there is leakage-this is inevitable. Of course, leaks can cause monetary losses in terms of downtime and maintenance of industrial ...
Whether compression accessories are reliable
2020-05-14
Reliability thread and compression of plumbing fittings No matter where there is liquid, there is leakage-this is inevitable. Of course, leaks can cause monetary losses in terms of downtime and maintenance of industria...
How do push-in accessories work
2020-05-09
All information about push-in plumbing fittings and how they work Push-in fittings are increasingly available in home improvement centers and hardware stores, mainly because consumers find them very easy to use. Compared...