What is the connection method of stainless steel quick connector?

A stainless steel quick connector doesn't mean it won't rust, it just means corrosion resistance. Therefore, stainless steel products also require maintenance. Next, let's talk about common sense in stainless steel maintenance. It is well known that the thermal conductivity of stainless steel is relatively small. Therefore, the heat dissipation will be slow at the bottom, so the temperature will be concentrated on the bottom. In order to save fuel and prevent food from burning, the fire source should be properly adjusted to make the heating surface of the stainless steel bottom even. Burnt food is inevitable. When this happens, we can soak it in water first, then gently scrape off the burnt part with wood chips to clean the dust off the bottom. After washing, wipe with a soft cloth and keep in a dry place.





When the two ends are not connected, when the mother's ferrule is pushed to the other side, it will roll out on its own, removing the daughter; since neither the daughter nor the mother are present, it will flow out. Connection: When the daughter body is inserted into the mother body, it is pushed into the original position under the action of the spring to lock the steel ball and its flow. O-rings are used to prevent fluid leakage. Single opening and closing. When it is not connected, when the ferrule of the mother body moves to the other side, the ball of the stainless steel quick connector will roll out by itself, and the daughter body will bounce up under the reaction of the spring, closing its flow by itself. When connecting, when the daughter body is inserted into the side of the female body with the ferrule, it is made to flow, and the washer is pushed back to the starting position by the spring. Its bead will lock the child/parent connection, and the internal gasket completely prevents it from leaking.