Different models of brass pipes have different uses

Shallow brass pipes are used differently depending on the model. There are mainly the following differences:

1. Shallow brass pipe: It has excellent plasticity and high strength. It has good cutting and processing functions, is easy to weld, and is not stable to common corrosion, but it is prone to cracking. It is one of the most widely used varieties in shallow brass. Used for complex cold stamping and deep drawing parts, such as radiator shells, bellows, ducts, cartridges, gaskets, etc.

2, H70 shallow brass pipe: has excellent plasticity and high strength, brass pipe cutting processing function is good, easy to weld, non-destructive to the common corrosion, but prone to cracking. Used for complex cold stamping and deep drawing parts such as radiator housings, cartridges, conduits, bellows, gaskets.

3, H75 shallow brass pipe: has a very good mechanical function, process function and corrosion resistance. It is well pressed in hot and cold conditions. It is between H80 and H70 in terms of function and economy. For low load corrosion resistant springs.

4, H96 shallow brass pipe: high strength than copper, good thermal conductivity, electrical conductivity, high corrosion resistance in the atmosphere and then, and superior plasticity, easy to cold, hot pressure processing, easy to weld, forging and plating Tin, no stress corrosion cracking tendency. It is used as a conduit, a condenser pipe, a radiator pipe, a heat sink, a car water tank belt, and a conductive part in a popular machine manufacturing top.