How to maintain the surface of the brass pipe

Regarding the demand for the appearance of the brass pipe, it is necessary to continue to study and summarize the progress of the brass pipe. We can use the solvent and emulsion to finish the steel. It can remove the dust, oil and other things from it. However, there is no way to remove the rusted substances and scales from these things, so they only need to prevent corrosion. Can get up and play a role. We can use the wire brush to polish these things on top, and remove the rust and other substances on it.

Nowadays, many occupations related to brass pipes have been carried out indefinitely, especially in the fields of electric power and marine industry, which have made the high-precision brass pipes have more room for development. The original brass pipe has a very good ability to release corrosion, but if the force is too great, or when it comes into contact with some corrosive materials, there will still be a situation of corrosion cracking. There have also been cases where the brass pipe in the air pumping area of ​​the condenser has been broken. Some copper pipes have been subjected to relatively large tensile stress, and in the empty pumping area, there is a relatively large amount of ammonia. After a certain time has passed. The stress corrosion is getting more and more severe, and the copper pipe is finally broken. In the past few years, some steam cracks on the steam side of the copper pipe have been found in the eddy current of the condenser copper pipe. There are many brass pipes in the empty pumping area, and the crack is generally horizontal. However, some of them are vertical, and some cracks are very small. It is difficult to find when viewing, and unnecessary damage is formed. Condenser equipment is not necessary, because there is water inside, and the brass pipe and the air cut are directly in contact, so that the corrosion of the equipment in the time of deactivation can be greatly stronger than the corrosion of the working time. If it is not used for more than three days, clean the water inside, let it be copper door, and keep it dry; if it stops using a short period of time, let the pump continue to work to prevent the suspended matter in the circulating water from sinking. , the ability to reduce the corrosion of the condenser. After observing the condenser equipment, knowing the operation status of the equipment, the standard records, use the correct method to use the brass pipe of the curing condenser.